Skip to content
WRT India Contact WRT

Marine & ports

Keep the vessel moving. Keep the crane working.

Condition monitoring for crane structures, rotating machinery and lubricated equipment across marine and port operations.

Explore the use cases
Marine & ports industrial application

Monitoring that starts with the asset.

Marine and port maintenance teams work around vessel schedules, cargo operations and access to equipment. An inspection of the supporting steelwork and a check of a drive’s oil answer different questions. Start with the asset and its maintenance concern, then select the measurement that will help the team decide what needs attention.

Ship-to-shore crane structures

Follow fatigue-critical locations between inspections.

The maintenance concern

A crane structure is repeatedly loaded throughout cargo operations. Where inspection has identified fatigue-critical details, the team needs a way to understand how monitored locations are changing between planned visits. Access and the operational schedule influence when an investigation can take place.

A monitoring approach

Villari uses local probes to monitor fatigue crack growth at selected steel locations. Wireless reporting brings measurements into a dashboard with location indicators, historical trends and warnings. Review probe placement, transmitter coverage and gateway connectivity with the structural details and existing inspection findings.

The decision it supports

Use the location-based information to focus engineering review and plan the next inspection or repair discussion. The wider crane inspection programme remains part of the maintenance plan.

Bulk-handling cranes and difficult access

Make the next access visit better informed.

The maintenance concern

Some structural locations on cargo-handling cranes are difficult to reach. Before planning additional monitoring, the engineering team needs to identify the detail of concern, the existing inspection evidence and what a change in condition would mean for the next maintenance action.

A monitoring approach

Discuss a Villari deployment for the selected fatigue-critical locations. Battery operation, wireless reporting and installation on painted steel are relevant when evaluating the practical arrangement. The monitoring scope should be linked to the locations the engineering team needs to follow.

The decision it supports

Build an inspection discussion around monitored changes and the available access opportunity, with a defined person responsible for reviewing dashboard warnings.

Pumps, compressors and rotating drives

Put machinery behaviour beside operating conditions.

The maintenance concern

A vessel or terminal may have auxiliary machinery whose condition needs closer investigation. The useful questions include whether a change repeats, whether it follows load or start-up, and which machine needs further attention.

A monitoring approach

TWave T8 is a machinery-supervision option to discuss for the required dynamic measurements and analysis. Its browser interface, machine-state alarms and historical tools can bring operating context into the review. For a marine installation, confirm the specific equipment, environment, installation and applicable requirements as part of selection.

The decision it supports

Give the maintenance team a clearer record for prioritising investigation and planning service work around the operating schedule.

Gearbox, hydraulic and lubricating-oil checks

Choose between a sample visit and ongoing measurement.

The maintenance concern

For a lubricated asset, a concern may involve oil condition, contamination or wear material. A single test does not answer all three. Access to a suitable sample point and the required testing frequency should shape the measurement workflow.

A monitoring approach

WAS300 offers configurable portable oil analysis. WPC150 addresses particle counting. For a suitable oil-system installation, discuss WOD218 for gear oil or WOP210 for its listed oil-system applications. Confirm the oil, selected parameters and sampling or installation arrangement.

The decision it supports

Link findings to the asset and sampling point, then use the record to decide what merits further testing or investigation.

Plan the measurement. Plan the response.

Start with the equipment or structural detail, the condition question and the information already available. Review sampling or installation access, the operating environment and who will use the measurements. Then agree which findings should trigger investigation, further testing or an inspection discussion.

Share the asset details, existing inspection or maintenance findings and the parameters you need. WRT India can discuss the relevant instruments and configured systems, including a catalogue or demonstration for the shortlisted options.

Explore the relevant systems.

Compare the measurement focus, then open a product for its application guidance and technical specifications.

Villari

Structural & EOT Crane Crack Detection

Wireless monitoring of fatigue crack growth in steel structures. Villari combines local sensor probes, LoRaWAN communication and an online dashboard to support inspection and repair decisions for critical assets.

View system details
TWave T8

Condition Monitoring System

A compact machinery supervisor for vibration analysis and predictive maintenance. TWave T8 combines high-speed acquisition, an embedded browser interface and advanced diagnostic tools, with optional TCloud access.

View system details
Sensor Suite

Oil & Condition Sensors

Oil-quality, vibration, ultrasound and temperature sensors for condition-monitoring applications. Select sensing technologies and communication options around the asset and required measurements.

View system details
WAS300

Comprehensive Oil Analyzer

Bring oil-condition, particle-contamination and wear-debris checks into one portable system. WAS300 combines an inbuilt sample heater, rechargeable operation and printed results for onsite analysis.

View system details
WPC150

Portable Particle Counter

Measure particle size and concentration in liquids using light extinction. The portable WPC150 supports sample testing and configured pressurised sampling, with cleanliness reporting to multiple standards.

View system details
WOD218

Online Gear Oil Monitoring System

Continuously monitor gear-oil condition and wear debris with touchscreen controls, local trend analysis and optional cloud visualisation.

View system details
WOP210

Hydraulic/Turbine Oil Monitoring System

Monitor hydraulic, turbine and transformer oil systems with configurable oil-condition and particle-contamination measurements. Local processing, trend analysis and optional cloud access support ongoing maintenance.

View system details

Let’s look at your marine & ports application.

Share the asset, the condition concern and the information you need. We’ll help you review the appropriate measurements and configured systems.

Discuss this application