Skip to content
WRT India Contact WRT

WAS300 Comprehensive Oil Analyzer

LabOnsite

Bring oil-condition, particle-contamination and wear-debris checks into one portable system. WAS300 combines an inbuilt sample heater, rechargeable operation and printed results for onsite analysis.

WAS300 Comprehensive Oil Analyzer

Bring oil-condition, particle-contamination and wear-debris checks into one portable system. WAS300 combines an inbuilt sample heater, rechargeable operation and printed results for onsite analysis.

Give the onsite team a broader view of the oil sample

A maintenance decision often needs more than a single oil parameter. WAS300 brings oil-condition, particle-contamination and wear-debris checks into a portable system, helping a site team review several aspects of the same sample during a maintenance visit. Its inbuilt heater, rechargeable operation and printout support a practical onsite workflow.

Where WAS300 fits in a maintenance programme

A plant with several types of lubricated equipment

In a steel, cement or process plant, maintenance staff may need to assess samples from different lubricated assets. A configurable multi-parameter instrument provides a way to bring those checks together rather than organise a separate visit for every measurement. Review the oil type and required parameters with WRT before selecting the measurement package.

An investigation that needs results at the asset

When a sample is taken during an equipment investigation, onsite measurement helps the team discuss findings while the operating context is fresh. WAS300 lists a one-minute test cycle, a 50 ml sample volume and four hours of rechargeable operation. Its printout can accompany the maintenance record and any further laboratory investigation.

Building a repeatable route for onsite oil checks

For teams introducing a routine sampling route, the value lies in a consistent record: which asset was sampled, when, under what conditions and which parameters changed. WAS300 can provide several measurements in that workflow. The site still needs suitable sampling practices, reference information and a process for reviewing unusual findings.

What to review before selecting WAS300

Start with the questions your team needs to answer: lubricant condition, moisture, cleanliness, wear material or a combination. Confirm the selected measurement channels, oil compatibility and how the results will be recorded. A combined portable instrument is useful when those needs belong to the same visit; a dedicated tester may suit a narrower task.

Common application questions

Are all listed measurements standard in every WAS300 configuration?

The measurement package is customisable. Review the parameters you require with WRT so the proposed configuration matches your application.

How is WAS300 different from a permanently installed online system?

WAS300 supports portable sample analysis. Online products measure from a configured oil system during operation. Choose around sampling access, the required measurements and how often condition needs to be reviewed.

Key features

  • One-minute test cycle
  • Inbuilt sample heater
  • Onsite measurement with printout
  • Customisable measurement configuration

Technical specifications

Parameter Specification
Test time 1 minute
Sample volume 50 ml
Battery operation 4 hours, rechargeable
Carry case 470 × 360 × 200 mm
Viscosity 1–1,000 cSt
Density 600–1,250 kg/m³
Moisture 0–2,000 ppm
Temperature 0–110 °C
Water activity 0–1 aW
Particle reporting 8 channels, 1–100 μm; ISO 4406 or NAS1638
Wear debris Ferrous and non-ferrous classification
Consumables Not required

Tell us what you need to monitor.

Talk to WRT India