Skip to content
WRT India Contact WRT

WTN104 Online TAN, Temperature & Moisture System

Online

Track total acid number, moisture and temperature through continuous oil monitoring. WTN104 supports dynamic and static measurement with optional touchscreen, pump, controller and cloud visualisation.

WTN104 Online TAN, Temperature & Moisture System

Track total acid number, moisture and temperature through continuous oil monitoring. WTN104 supports dynamic and static measurement with optional touchscreen, pump, controller and cloud visualisation.

Make acid-number trends part of the oil-condition picture

When the maintenance question includes total acid number, a dedicated measurement can add information that a general cleanliness or viscosity check does not provide. WTN104 combines TAN, moisture and temperature monitoring using a dual MEMS IR sensor, with a listed 30-second measurement cycle.

Where WTN104 fits in a maintenance programme

Following a TAN requirement in a lubricant programme

A team that already uses TAN as part of its oil-condition assessment can discuss how WTN104 measurements would fit that programme. Review trends with the oil type, operating conditions and reference testing used by the site. A measurement range is not a universal alarm limit or an oil-change recommendation.

Planning the measurement arrangement at the plant

WTN104 supports dynamic and static measurement, with touchscreen, integrated pump and controller options. This gives the team different deployment elements to consider around the oil circuit and access requirements. Confirm which components are required and how results will be reviewed before finalising the system.

What to review before selecting WTN104

Consider WTN104 when TAN, moisture and temperature are the requested parameters. Confirm the intended oil and any comparison with the site’s existing test method. Discuss historical storage, the display arrangement and optional cloud visualisation as parts of the complete application.

Common application questions

What is the stated TAN measuring range?

The listed range is 0–40 mg KOH/g. The appropriate interpretation and action levels depend on the lubricant and maintenance programme.

Does the model include a touchscreen and pump in every configuration?

These are optional components. Confirm the required hardware and reporting arrangement with WRT.

Key features

  • 30-second measurement cycle
  • Dual MEMS IR sensor
  • Dynamic and static monitoring
  • Optional cloud visualisation

Technical specifications

Parameter Specification
Cycle time 30 seconds
TAN range 0–40 mg KOH/g
Temperature 0–70 °C
Moisture Up to 5,000 ppm
Sensor Dual MEMS IR
Historical storage 5 years
Optional components Touchscreen, integrated pump and controller

Tell us what you need to monitor.

Talk to WRT India