Skip to content
WRT India Contact WRT

WPC150 Portable Particle Counter

LabOnsiteOnline

Measure particle size and concentration in liquids using light extinction. The portable WPC150 supports sample testing and configured pressurised sampling, with cleanliness reporting to multiple standards.

WPC150 Portable Particle Counter

Measure particle size and concentration in liquids using light extinction. The portable WPC150 supports sample testing and configured pressurised sampling, with cleanliness reporting to multiple standards.

Put oil cleanliness into the maintenance conversation

When contamination control is part of the maintenance programme, a clear particle-cleanliness result helps the team review the oil system with evidence. WPC150 uses light extinction to measure particle size and concentration, with eight detection channels and multiple cleanliness-reporting standards. It supports sample testing and configured pressurised sampling.

Where WPC150 fits in a maintenance programme

Reviewing cleanliness in a hydraulic-oil programme

A team maintaining hydraulic equipment may need a particle count to compare with a specified cleanliness requirement. WPC150 provides particle sizing and reporting within its stated range. Use the result with the sampling point, oil-system conditions and maintenance history when reviewing filtration or further investigation needs.

Sampling from a pressurised oil circuit

Where the measurement needs to be taken from a pressurised circuit, the sampling arrangement must match the installation. WPC150 lists online sampling pressure options. Review pressure, temperature, liquid compatibility and the required accessories with WRT before selecting a configuration; the Online tag does not imply every unit is an unattended permanent installation.

What to review before selecting WPC150

Start with the cleanliness standard used by your programme and the way the sample will reach the instrument. WPC150 is a particle-counting choice. It does not replace viscosity, moisture or ferrous-debris testing when those are the measurements needed to understand lubricant or machine condition.

Common application questions

What does Online mean for WPC150?

It refers to configured pressurised sampling. Confirm the actual sampling setup and pressure requirement rather than assuming all configurations provide the same deployment.

Does a particle count identify the material of every particle?

The stated measurement is particle size and concentration using light extinction. Use a suitable wear-debris method when the question concerns ferrous or non-ferrous material.

Key features

  • Eight particle-detection channels
  • Light-extinction measurement
  • Reverse-flow capability
  • Multiple cleanliness reporting standards

Technical specifications

Parameter Specification
Particle size range 1–100 μm
Counting accuracy ±10% or ±0.5 level
Repeatability RSD <5%
Sampling volume 10–100 ml
Liquid temperature 0–60 °C
Online sampling pressure 0.1–0.6 MPa; up to 41 MPa configuration listed
Dimensions / weight 268 × 246 × 148 mm / 6 kg
Reporting standards ISO 4402, ISO 11171, ISO 4406, NAS1638, AS4059D and SAE749D
Deployment note Online capability is pressurised sampling; select configuration for the application

Tell us what you need to monitor.

Talk to WRT India