WVM150 Portable Kinematic Viscosity Meter
Check the kinematic viscosity of transparent and opaque Newtonian liquids in a portable, temperature-controlled system with automatic cleaning and onsite printout.

Check the kinematic viscosity of transparent and opaque Newtonian liquids in a portable, temperature-controlled system with automatic cleaning and onsite printout.
Check viscosity when lubricant suitability is the question
When a maintenance team needs a controlled-temperature viscosity result, the test conditions matter as much as portability. WVM150 measures kinematic viscosity using a tube method and supports transparent and opaque Newtonian liquids. It brings temperature-controlled testing, automatic cleaning and printed results into an industrial carry case.
Where WVM150 fits in a maintenance programme
Reviewing an oil sample during a lubricant investigation
A plant team may need to examine whether a sample meets the viscosity requirement used in its maintenance programme. WVM150 provides testing over 40–100 °C, with high- and low-viscosity tubes available. Review results at the relevant test temperature and against the lubricant requirements supplied by the equipment or oil provider.
Taking temperature-controlled testing to the site
For a team that needs a portable test arrangement, the carry case and battery operation support deployment beyond a permanent bench. The listed test time is within three minutes, with battery duration dependent on test temperature. Plan power, cleaning and sample handling for the intended testing route.
What to review before selecting WVM150
Consider WVM150 when the task requires kinematic-viscosity testing with temperature control and a method referencing ASTM D445. Compare it with WVDT100 for a quick dip-and-test field check, or WAS300 when viscosity is one of several required parameters. Confirm the tube selection for the liquids and viscosity range you expect.
Common application questions
Which liquids can WVM150 measure?
It is described for transparent and opaque Newtonian liquids. Discuss the intended sample and viscosity range before selecting the testing arrangement.
Is battery duration the same at every test temperature?
No. The stated durations are 16 hours at 40 °C and eight hours at 100 °C. Plan the field workflow around the intended temperature and power access.
Key features
- Portable industrial carry case
- Integrated automatic cleaning
- Results within three minutes
- Printout of oil-analysis results
Technical specifications
| Parameter | Specification |
|---|---|
| Standard | ASTM D445 |
| Test time | Within 3 minutes |
| Test temperature | 40–100 °C |
| Testing method | Tube method; high- and low-viscosity tubes available |
| Display | 5-inch screen with guided operation |
| Battery life | 16 hours at 40 °C; 8 hours at 100 °C |
| Dimensions / weight | 430 × 240 × 300 mm / 12 kg |
| Power | 220 V AC |
